Almost all of us at one time or another has met the dialogue box saying USB Device Not Recognized after we tried to affix the flash drive or the other USB devices. It is bad when the words are used right at the time we are geared to performing particular tasks with our laptops. It gets worse when we are actually in the process of saving or retrieving an important, “for your eyes only” kind of document.
Let us examine what the problem could be
Occasionally when a flash drive is put in the slot, it may refuse to work as opposed to putting it in the hub and vice versa. But predominantly, the USB hubs or the port replicators pose more problems as opposed to the direct computer slots. The menace happens more when dealing with laptops via their port replicators confined within docking stations than the desktops. At other times the problem is as simple as improper insertion of the USB device and nothing more. The cables and the computer wirings may have loosened, making the USB device unrecognizable. The other important problem may lie in the operating system and not the peripherals themselves.
The USB mishap; what then are the solutions?
If the USB device was improperly connected, it should be re-inserted to ensure that it settles firmly in the USB slot. The wiring and cables problem can be solved by first shutting down the computer then fitting well the loose cables and wiring then restarting the computer. You must remember with a loose cable or wire, the USB scanning will not proceed as expected and careful checkup on them is therefore necessary. Both these two factors are the most common reasons for the unrecognized error that raises despair in most users’ minds. The other important solutions to the USB unrecognized fiasco are given as thus:
Power management disabling
When the going gets tough you will need to enter deep into the Windows Operating System to get the solution to the USB problem. What you need to do is to select the windows search and type the words “devmgmt.msc” on the type in space. As soon as a file is presented simply “enter” and you will stream in the USB (Universal Serial Bus) property division. Ensure that you then enter the power management section and be keen on the “allow computer to turn off this device” small box and next click on “reboot.’ This method might just go all the necessary way to allowing the Operating System to work out the USB problem. This method, furthermore, can be enacted on the Notebook PCs but has the unfortunate downside of lowering the life of your computer battery in the long run.
Drivers and patches download
USB Device Not Recognized can be gotten rid of by system updates; infusing a new driver or patch. This works when the above means of solving the issue have bore no fruit and in case this does not work either, then you will need to update the whole OS. But be careful, that this option should be considered after all the smaller channels as mentioned earlier, have been employed. Updating the OS with a new one without such a consideration may be worthless as chances are that the original OS was powerful and very okay.
Add New Hardware Installation way
This procedure to solve the USB unrecognized error can be called the control panel procedure. Once the USB is affixed to its slot, click on the start menu and go to the control panel. In the panel you will find Add New Hardware and then you will double click on the icon to allow the computer scan for the entire scope of installed software and programs in the computer. The USB may be recognized in the process but in case it doesn’t, then close the Add New Hardware and click on the Add New hardware manually icon. The process may eventually demand that you get hold of a CD installer and when this happens follow the required step by step process to the letter. This is as technologically far as beating the USB unrecognized error can go but one small step still remains if you don’t beat the menace.
This step is tied to the control panel procedure where you will then click on the “next” part in the Add New Hardware option where screen listing of manufactures and the devices will be displayed. Here you will check to see if the device you have inserted in the slot appears and then you will select it. This works just the same as when you are dealing with the printer and you are occasionally forced to select HP Printer with a number there in order to enact any printing.
